Porous Pave
Manufactured in the U.S.A., Porous Pave is a pour-in-place permeable paving material. With 27 percent void space, Porous Pave delivers 5,800 gallons per hour per square foot permeability. Made with chips of recycled rubber, it is an eco-friendly, green building product. Porous Pave has been proven in successful installations for a wide variety of permeable pavement applications from Massachusetts to Arizona, California to Florida, Minnesota to Texas, and most points in between.

Superior Permeability:
-
More void space than permeable pavers, pervious asphalt, pervious concrete – more porosity, more permeability for more rainwater infiltration
-
Smaller installations deliver the same stormwater mitigation as more extensive, and more expensive, installations of other permeable paving materials
-
Reduces the need for other on-site measures (retention ponds, swales) – more site area remains useable
Three Formulations
-
Porous Pave XL – our strongest, most durable blend of 50 percent recycled rubber chips and 50 percent kiln-dried aggregate, plus a hard binder, for hard wearing permeable pavement
-
Porous Pave XLS – 100 percent recycled rubber chips with a softer binder for more impact-absorbing permeable surfaces
-
Porous Pave XLB – like XL, a 50-50 rubber-rock blend mixed with a binder selected for golf course bunker liner applications
Exceptional Strength and Durability
-
Two inches of XL over a compacted aggregate base can even support low-speed traffic areas, including loading docks
-
Two inches of XLS over a compacted aggregate base for pool decks, splash pads, play areas
-
One inch of XLB directly on golf course bunker floors guards them for years with a solid, seamless liner
-
Endures freeze-thaw cycles, frost and ground movement – no heaving, no cracking
Excellent Traction
-
ADA compliant
-
Safe and slip-resistant – even when wet
-
No puddles – even in low areas, even during and after heavy rains
-
After snow removal, residual water permeates down – no freezing, no ice
Unmatched Versatility
-
Endless applications – even installs on steep grades up to 30 degrees
-
As a topcoat, covers and bonds with old concrete, asphalt, brick, tile, and wood surfaces – eliminates the cost, disruption, and waste of tear-outs
-
Pour-in-place flexibility to conform to curves, express designs
-
Eight standard colors, multiple custom color mixes
Low-impact Installation
-
Mix on site, pour in place without extensive excavation, or sub-grade prep – takes half the time to install as brick pavers
-
Applied as a single monolithic pour – no expansion strips
-
Sets up fast – cures in as little as 24 hours
-
Low-impact installation, no big trucks, no heavy equipment – minimal site disruption, reduced risk of damage to landscapes
Environmentally Friendly
-
Best Management Practice (BMP) to retain and infiltrate stormwater
-
Decreases the volume, slows the velocity of runoff
-
Reduces erosion
-
Made with rubber recycled from scrap tires – every 1,000 square feet of two-inch Porous Pave removes over 4,000 LB of old tires from the waste stream


